|
Non Hurricane Approved Design Pressure Loads
The adjacent charts show tested wind load pressures for most of
our profiles. These have not been subjected to impact tests and
are not recognized as approved hurricane shutters.
How to use the following charts:
- Find the width of the opening on the bottom of the charts at
left.
- Go up to the required Design Pressure (PSF).
- All slat curves to the right can be selected for your application
| Slat Code |
|
| A-PV1 |
|
| B-PV2 |
|
| C-PV3 |
w/ reinf. @ 2nd slat |
| D-PV3 |
w/ reinf. @ 3rd slat |
| E-PV4 |
w/ reinf. @ 2nd slat |
| F-PV4 |
w/ reinf. @ 3rd slat |
| G-AL2 |
(Aluminum) |
| H-AL3 |
(Aluminum) |
| I-ST3 |
(Steel) |
| J-AL2-E |
(Aluminum) |
| K-AL3-E |
(Aluminum) |
|
Products 
